OTECO manufactures ten different styles of manifold fittings in 2 inch, 3 inch, 4 inch, and 5 inch with working pressures ranging from 3,000 psi to 7,500 psi with test pressures up to 11,250 psi. Each fitting can be supplied with either line pipe threads, or Schedule XX or 160 buttweld end connections. Special connections are available upon request. All fittings are hydrostatically tested prior to shipment and full certification can be supplied upon request.
AVAILABLE OTECO MANIFOLD FITTINGS
45⁰ Long Sweep Ells
90⁰ Long Sweep Ells
90⁰ Long Sweep Ells with 2 in. outlet
160⁰ Standpipe Gooseneck
160⁰ Standpipe Gooseneck with top outlet
180⁰ Standpipe Gooseneck
Long Sweep Full Flow Cross
Long Sweep Full Flow Tee
Long Sweep Tee
Long Sweep Y
OTECO manufactures wireline turnback assemblies and components. In addition, we have replacement rollers for the BJ model Roliguide. OTECO also offers complete wireline guide units and wireline guide hanging assemblies for most beam or angle type derricks. Additional information can be found in the Oteco Rig Hardware Product Brochure.
OTECO mud guards come in two models: the MG-600 and MG-800. Our mud guards have proven cost effective in saving the expense of lost drilling fluids, reduced labor for rig wash down, as well as reducing the potential for accidents due to slippery rig floors. The MG-600 is 6 ft. x 10-3/4 in. and can handle drill pipe sizes from 2-3/8 in. to 5-1/2 in. The MG-800 is 6 ft. x 16 in., its larger cavity is designed for drill pipe sizes from 2-3/8 in. to 6-5/8 in. and can handle larger volumes of line fluids. Both models can be supplied with neoprene (standard) or nitrile (upon request) end and side seals.
Similar in design to our mud guards, the OTECO Oil Guard MG-500 is 4 ft. x 6 in. and is designed to accommodate tubing sizes ranging from 2-1/16 in. to 3-1/2 in.